Wednesday, March 28, 2012

Cotton Candy Baby Hat -Free Crochet Pattern



sizes 0-3 months (3-6 months, 6-12 months)

Materials: K hook, bulky yarn, needle for weaving in ends

Notes: All terms are US crochet terms, pattern begins with a magic circle but you can substitute a ch 4 connected into a ring with a slip stitch.

Abbreviations: ch-chain, dc-double crochet, sl st-slip stitch, sp-space, sc-single crochet

Round 1: Magic circle, ch 3, 8 (9,10) dc for total of 9 (10,11) dc (starting ch counts as first dc), sl st to top loop of ch 3.

Round 2: ch 3, dc in same space as ch 3, 2 dc in each dc around, connect with sl st to top of ch 3.

Round 3: ch 3, dc in same sp as ch 3, dc in next dc, 2dc in next dc*, repeat from * to * to end of round, connect to the top of the ch 3 with a sl st.

Round 4: ch 3, dc in same sp as ch 3, *dc in next 2 dc, dc in next dc*, repeat from * to * until you reach the end of the round, connect to the top of the ch 3 with a sl st.

Round 5: ch 3, dc in next st and in each stitch to the end of the round, connect to the ch 3 with a sl st.

Round 6: repeat row 5 (for size 6-12 months repeat one more time)

Round 7: ch 1 (does not count as a st), sc in each dc to the end of the round, connect with a sl st to the top of the first sc.

Round 8: ch 1, sc in each sc to the end of the round, connect with a sl st to the first sc.

Round 9: ch 1, work the following stitch pattern around the hat: *sc,dc,dc,sc* repeat. When you reach the end of the round connect with a sl st to the first sc and fasten off. Weave in ends.

You can use as is or dress it up with a flower or bow. 


Thursday, March 8, 2012

Newborn Turtle Photo Prop Set Free Crochet Pattern

I've debated back and forth on releasing this pattern on my blog for free or as a paid pattern on Etsy. In honor of the big Mommy & Baby giveaway I decided to go ahead and do it for free because every baby deserves to have extra special newborn pictures!!! Please see the terms of use tab on the blog for information on how this pattern may and may not be used. 



Newborn Turtle Photo Prop Set
By Kate Knapp @ Crafty Kate Going Crazy

Materials Needed:
Worsted weight yarn in 2 shades of green (I used one skein Bernat Satin dark green and one skein Lion Brand Vanna’s Choice in a medium green.

Sizes H & K crochet hook Tapestry needle

Abbreviations:
Sc – single crochet
Dc- double crochet
Sc2tog- single crochet decrease
Sl St- slip stitch Ch- chain

Stitch Explanations: Sc2tog- insert hook into indicated stitch, yo, pull through loop, insert hook into next stitch, yo, pull through loop, yo, pull through the 3 loops on the hook.

Notes:
This pattern is written in US Crochet Terms.
 
The shell is worked with two strands of yarn held together.

Both items begin with a magic circle, there are many tutorials on this online.

Instructions are for a newborn size, you can up the sizing to a 3 months size by going up one hook size for the hat and shell.

Both pieces are worked in the round, starting chains do not count as stitches and you do not turn after the chain.

Hat Instructions:

Round 1: using the lighter green and the size H hook create a magic circle, ch 2, 10 dc. Sl st in 1st dc. (chains do not count as stitches in this pattern)

Round 2: ch 2, do 2 dc in each dc of prior round. Connect with a sl st to the first dc (not the chain)

Round 3: ch 2, 1 dc in first stich, *2 dc in next stitch, 1 dc in the following stitch* repeat from *to* until the end of the round, connect with a sl st to the first dc.

Round 4: ch 2, 1 dc in first stitch, *2 dc in next stitch, dc in the next 2 dc*, repeat from * to * until the end of the round, connect with a sl st to the first dc.

Round 5: ch 2, 1 dc in first stitch, *2 dc in the next stitch, dc in the next 3 dc*, repeat from * to* until the end of the round, connect with a sl st to the first dc.

Round 6-9: ch 2, 1 dc in each stitch, connect with a sl st to the first dc.

Round 10: change to the darker green and ch 1, work 1 sc in each stitch around. Fasten off and weave in ends.

Turtle Shell Instructions:

Round 1: Start with a magic circle using two strands and the K hook (one of each green which will create a mottled shell look). Ch 2, work 8 dc in the magic circle.

Round 2: ch 2, work 2 dc in each dc of prior round. Connect with a sl st to the first dc (not the chain)

Round 3: ch 2, 1 dc in first stich, *2 dc in next stitch, 1 dc in the following stitch* repeat from *to* until the end of the round, connect with a sl st to the first dc.

Round 4: ch 2, 1 dc in first stitch, *2 dc in next stitch, dc in the next 2 dc*, repeat from * to * until the end of the round, connect with a sl st to the first dc.

Round 5: ch 2, 1 dc in first stitch, *2 dc in the next stitch, dc in the next 3 dc*, repeat from * to* until the end of the round, connect with a sl st to the first dc.

Round 6: ch 1, work one sc in each stitch around, connect to the first sc with a sl st.

Round 7: Using one strand of the light color ch 1, work one sc in each stitch around, connect to the first sc with a sl st. Fasten off and weave in ends.

Now we will make the patches on the shell using just the one strand of the lighter green and the H hook. Make a total of 5 patches.

Foundation and Row 1: ch 2, work one sc in the 2nd ch from the hook. (1 sc)

Row 2: ch 1, turn, work 2 sc in the sc. (2 sc)

Row 3: ch 1, turn, work 2 sc in each sc. (4 sc)

Row 4: ch 1, turn, work 2 sc in the first sc, one sc in each of the next two stitches, work 2 sc in the last stitch. (6 sc)

Row 5: ch 1, turn, work 2 sc in the first sc, work one sc across until the last stitch, work 2 sc in the last stitch. (8 sc)

Rows 6 & 7: ch 1, turn, work 1 sc in each stitch. (8 sc)

Row 8 & 9: ch 1, turn, work a sc2tog, sc in each stitch across except the last 2 stitches, sc2tog. Fasten off leaving a long tail for sewing. (you will have 6 stitches in row 8 and 4 stitches in row 9).

Sew on using random placement and rotating the patches on the shell to achieve a more natural look.

Sunday, March 4, 2012

Diamond Crochet & Crafts Newborn Bulky Pouch Pattern

First up in a month full of wonderful baby crafts is a pattern by my good friend and very talented designer Teri over at Diamond Crochet & Crafts blog. This is a fantastic baby photography prop that is worked in Lion Brand Homespun with a Q hook. It works up fast, looks beautiful, and is soft and cozy for the baby who is lucky enough to be photographed in it. Click the link below to access the pattern.





Check out Teri's other awesome baby and adult patterns at her blog, on Etsy, Ravelry.com, or on Facebook.
http://www.facebook.com/diamondcrochetcrafts

Wednesday, February 15, 2012

NOW FREE! Toilet Paper Cover & Toilet Rug Pattern


This is an updated version of my toilet paper cover and I have added a pattern for a matching rug designed to fit around the base of the toilet.

  


Materials Needed:
7 ounces of worsted weight yarn for the potty shawl and as an accent color on the toilet paper cozy (in two balls) and 3 ounces of contrasting yarn for the toilet paper cozy.  It is best to choose an acrylic or cotton yarn that is washable.
Size M (9 mm) crochet hook, Size H (5 mm) crochet hook
Tapestry needle
Optional: non-slip rug backing
Abbreviations:
Sc – single crochet
Dc- double crochet
Dc2tog-double crochet decrease
St- stitch
Sl St- slip stitch
Ch- chain

Stitch Explanation:
Dc2tog:  yo, insert hook into indicated stitch, yo, pull through loop, yo, pull through first 2 loops on the hook, yo, insert hook into next stitch, yo, pull through loop, yo, pull through first two loops on the hook, yo, pull through remaining loops on the hook (there should be 3 loops on the hook).
Gauge:
Be sure to check your gauge.  If you gauge swatch is larger than what is indicated below, use a smaller hook.  If your swatch is too small then go up a hook size.
2 rows of 5 dc= 3.5” wide and 2” tall

Notes:
This pattern is written in US Crochet Terms.
The potty shawl is worked with two strands of yarn held together.  If you are not comfortable with this you can substitute a bulky yarn, keep in mind that you will to choose a machine washable yarn.
The shawl is designed to fit a standard size toilet; you may need to make adjustments if you want a perfect fit around your toilet.  The best way to do this is to lay it down and check the fit periodically around your toilet. 
The toilet paper cozy was designed to fit a double roll of 2-ply tissue.  Adjustments are included for fitting a single roll or mega roll.
Instructions:
Potty Shawl

Foundation Row: Ch 40
Row 1:  DC in 3rd ch from hook, dc in each chain to the end of the foundation chain. Ch 2, turn.  (38 dc) The turning chain does not count as a stitch throughout this pattern.
Row 2:  2 dc in first st,  dc in each st across to last st, 2 dc in last st. Ch 2, turn. (40 dc)
Row 3:  repeat row 2. (42 dc)
Row 4 – 12: dc in each dc across, ch 2, turn.  (42 dc)
Now we will begin working on one of the rug sides that go around the toilet base.
Row 13: dc in the next 13 dc, ch 2, turn.  (13 dc)
Row 14-18: dc in each dc across ch 2, turn.  (13 dc)
Row 19: dc2tog, dc in next 9 dc, dc2tog, ch 2, turn. (9 dc, 2 dc2tog)
Row 20: dc2tog, dc in next 7 dc, dc2tog.  Fasten off.  (7 dc, 2 dc2tog)
Attach to other edge of the piece with a sl st to begin the second rug side.  Repeat rows 13-20.  Weave in all ends.
Attach a single strand of  yarn with a sl st and sc around the edges of the finished piece.
Cut rug backing to size and shape of the potty shawl and sew on with yarn and tapestry needle.

Toilet Paper Cozy

Foundation Circle:  with your main color ch 8 and join to 1st chain with a sl st to make a ring. You want a finger sized hole in the middle of your ring; this makes it easier to slide the cover off when you're ready to use this roll.

Row 1:  ch 3 (always counts as first dc in this pattern), work 9 dc in the ring,  join to ch 3 with a sl st.  (10 dc)




Row 2:  ch 3, dc in same st as ch 3, 2 dc in each dc of prior row, join to ch 3 with sl st.  (20 dc)

Row 3:  ch 3, dc in same st as ch3, *dc in next st, 2 dc in next st*, repeat * to * to the end of the rd, join with a sl st to ch 3. (30 dc)

Row 4:  ch 3, dc in same st as ch3, * dc in next 2 st, 2 dc in next st*, repeat * to * to the end of the rd, join with a sl st to ch 3.(40 dc)

Omit Row 5 for a single roll sized cover.

Row 5:  ch 3, dc in same st as ch 3, *dc in next 3 st, 2 dc in next st*, repeat * to * to the end of the rd, join with a sl st to ch 3. (50 dc)

For a mega roll cover add a round following the same pattern putting 4 single dc between each increase stitch that has 2 dc in the stitch. (60 dc)

Row 6:  ch 1, sc in the back loop only of each stitch around, join to ch 1 with a sl st. This round will fall where the side and top meet and going through the back loop only creates a ridge that creates a sharp edge instead of a rounded edge.


Row 7-9:  ch 3, dc in each stitch around (through both loops from here on out), join to ch 3 with a sl stitch.

Row 10: change to contrast color and ch 3, dc in each stitch around, join to ch 3 with a sl stitch.

Row 11: change to main color and ch 3, dc in each stitch around; join to ch 3 with a sl stitch.

Row 12: ch 3, dc in each stitch around, join to ch 3 with a sl stitch.

(Now is a good time to check your fit, your cover should end about 1/4 to 1/2" above the end of the roll.)

Row 13:  switch to your contrast color. ch 1, sc in each stitch around, join to ch 1 with a sl st.

Row 14:  ch 1, sc in each stich around, join to ch 1 with a sl st.

Row 15:  change back to main color, ch 1, sc in each stitch around and join to ch 1 with a sl st.
Check fit.  Add an additional round of sc if needed.  Fasten off.  Weave in all ends.




Saturday, January 28, 2012

Angel Soft Baby Hat - Free Crochet Pattern

Long past time for a new pattern!  Today I am posting up my Angel Soft Baby Hat.  Perfect as a photo prop because it is designed to have interchangeable decorations that insert into the designed spaces between stitches. 




Angel Soft Baby Hat (with interchangeable adornment ideas)
Sizes 0-3 months, 3-6 months, 6-12 months, and 12 – 18 months
Materials Needed:
Worsted weight soft boucle yarn (I used a soft natural color of Plymouth Yarn Boucle Merino Superwash)
Hook Size H (5.0) for 0-3 months, I (5.50) for 3-6 months, J for 6-12 months, K for 12-18 months
Tapestry Needle
For adornments (optional): yarn scraps, 2” alligator clips, 3 ft. of ½” wide ribbon, premade hair bows or flowers, craft glue
Small alligator style hair clips 
Abbreviations:
Dc – double crochet
Sp- space
St- stitch
Sl st- slip stitch
Ch- chain
Notes
Pattern is written with US crochet terms.
Hat is begun with a magic circle, if you don’t know how to make this I highly recommend looking up one of the many good tutorials on it or you may substitute a ch 4, connecting with a sl st to the first ch to make a ring.
Gauge: gauge sample worked with a size I hook, 5 dc = 2 inches wide and ¾ inch tall, crochet a sample using your yarn and a size I hook to determine if you are crocheting with the tension needed for this project, if not you may need to adjust up or down a hook size to achieve proper sizing.  This hat does have a LOT of stretch so it's very forgiving size wise.
Instructions
Hat
Begin with a magic circle (see notes section).
Round 1: Ch 3 in magic circle (counts as first dc), work 8 more dc in the circle, connect to the top of the ch 3 with a sl st.
Round 2: ch 3, dc in same sp as ch 3, work  2 dc in each dc around, connect to the top of the ch 3 with a sl st.
Round 3: ch 3, dc in same sp as ch 3, ch 1, skip next st, *work 2 dc in next st, ch 1, skip next st*, repeat  from * to * to the end of the round ending with a ch 1 and skip last sp, connect ch 1 to top of the ch 3 with a sl st.
Round 4: ch 3, dc in same sp as ch 3, work one sc in next dc and in ch 1 space of prior round. *2 dc in next dc, 1 dc in next dc, 1 dc in ch 1 sp of prior round*, repeat from * to * to end of round and connect last st to ch 2 with a sl st.
Round 5: ch 3, dc in same sp as ch 3, dc in next 3 dc, *2 dc in next dc, 1 dc in next 3 dc*, repeat from * to * until you reach the end of the round, connect your last st with a sl st to the ch 3.
Round 6: ch 3, dc in next st, *ch 1 and skip next dc, dc in next 2 dc*, repeat * to * until end of round,  it should end with a ch 1 and skipped stitch, attach the ch 1 to the top of the ch 3 with a sl st.
Round 7: ch 3, work one dc in each dc and ch 1 space to end of round, sl st last dc to the top of the ch 3.
Round 8: ch 3, work one dc in each dc, join last dc to ch 3 with a sl st. 
If you want it a little longer you can add a row of sc around the bottom.  Fasten off and weave in ends.
Interchangeable Decorations
These are what make this hat awesome as a photo prop.  The openings worked into the hat make a great place to thread any color ribbon or to attach hair clip bows and flowers.  One hat….many looks!
How to make a flower clip:  crochet your favorite flower pattern (there are many, many out there and many are free).  Take your alligator clip and clip through the back of the flower being careful that the clip doesn’t show.  You can then attach the clip around the 2 dc in the 3rd row from the bottom.  If using crocheted flowers you do not need to permanently attach the flower to the clip making the clip reusable as well.
How to add ribbon:  weave a 3 ft. long piece of ½” wide ribbon in and out through the open spaces on the 3rd row from the bottom of the hat.  Start wherever you want your finished ribbon bow to be.  Once you have completed weaving the ribbon, tie in a pretty bow.
Use plastic or silk flowers: attach to an alligator clip using craft glue or a hot glue gun.


Thursday, January 19, 2012

Toilet Paper Cozy and Potty Shawl

I have decided to offer the first 30 downloads of this pattern for free from ravelry.com!  This is an updated version of my toilet paper roll cover and a matching floor rug that fits around the base of the toilet.  Once it has been downloaded 30 times it will be returned to it's normal pattern price of $1.50...which I think is quite reasonable considering the hours that went into designing it to fit perfectly!






Click here to download the pattern from ravelry.com

Wednesday, January 18, 2012

In A Jiff Scarf Crochet Pattern

This particular scarf is for sale on Etsy!

This is my own made-up go to pattern when I need to whip out a scarf really quickly or when I have some lovely super bulky yarn to use...but don't have a lot of it.  It is very easy to adjust the pattern to make it as wide or narrow as you need.  You can also add texture and a different look by making some very easy stitch changes which I will mention in the pattern.  Length is always dependent on who you are making the scarf for.  I usually will do a children's scarf between 3.5 and 4.5 feet long (minus the fringe) and an adult scarf between 5 and and 5.5 feet long (minus the fringe).  A children's length scarf takes about 2 hours if you crochet at a moderate speed (I'm by no means super fast!)

Materials:  super bulky yarn, size N (9 mm) hook, tapestry needle, measuring tape or ruler

Abbreviations: 
dc - double crochet
st - stitch
ch - chain

Instructions:
Foundation: ch 12. (add or subtract a stitch or two until you have a width you like)

Row 1: dc in 3rd ch from the hook and in each ch across. (our turning chain will count as a stitch throughout the pattern)

Row 2: ch 3, turn, dc in each dc across.

Continue row 2 until the scarf has reached it's desired length.  Fasten off and weave in ends with a tapestry needle.  Add fringe if desired. (see fringe instructions below)

Variation 1:
the green scarf in the photo above uses a slight variation, every other row of crochet is done in the back loop only (you can find instructions on how to do back loop only in a tutorial earlier in my blog).  This adds a subtle striping to the texture.  I like to do this when a yarn is a solid or a heather like the green.  If I use a multi-color yarn I generally just use regular dc stitches as the color adds the interest to the piece.

Variation 2: work every row in the back loop, this will produce a raised strip every two rows per side, as in the light blue scarf below.  The bright pink was worked in normal dc through both loops.

scarf worked in a chenille type yarn, the light blue was done with every row in the back loop only and the pink was done with standard dc.  Due to the texture of this yarn I omitted the fringe.


Adding fringe:  To add fringe first decide how long you want your fringe to be, since we are using super bulky yarn I take the length I want times two and add 2 inches.  For example if I want 5 inch fringe I would cut each piece of yarn for my fringe 12 inches long.  When making fringe out of worsted weight I use 2-3 strands for each stitch but with the bulkier yarn I would recommend using 1 or two strands.  If starting with a 12 chain foundation we will have 9 dc in each row therefore we will need either 18 or 36 strands (18 is one strand per stitch on each end of the scarf and 36 for two strands per stitch on each end).

Fold the strand or strands in half, use your hook to pull through the end stitch from the back.  Don't pull it all the way through, just far enough to make a loop.  Put the loose ends of the strands through the loop and pull tight.  Repeat in each stitch on both ends.  Trim with scissors when done so your fringe is nice and even.



Wednesday, January 11, 2012

Make Your Own Fleece Dog Ropes





Up until two days I ago I had 3 dogs, and then Miss Izzy a 5-year old doberman puppy (wow, does she act like a puppy) joined the pack.  It's expensive owning this many dogs so I save a little by making my own fleece dog ropes.  I can make about 10 for the same price as buying 1.

I prefer these to standard ropes because, quite frankly, I don't like pulling out rope strings out when the dogs do their business!  These have an added advantage of keeping your dogs teeth nice and clean.  So clean in fact that our veterinarian asked if we brush our dog's teeth!  (Like I have the time or patience for that!!!!)

What you need: 

Fleece (buy it on clearance or sale at your local fabric store or online).  You're going to want to buy a few yards when it's cheap and keep it on hand.  I would guesstimate that you need about 1/2 yard for a large rope toy.  I like to buy at least 3 different colors although I was down to only two when I made the rope in the pictures.

Scissors or some other cutting tool (I'm a quilter so I use my rotary cutter but it's totally not necessary)

That's it.....liking it so far?  Good.

Step 1:  prep your fabric by washing it and drying it to remove any chemicals from the fabric surface.

Step 2: cut your fabric into strips going from selvedge edge to selvege edge (the selvedge is the part that is on the sides when the fabric is on the bolt, you will be able to tell because the side where it was cut from the bolt is NOT a selvedge edge).  How wide you cut your strips will depend on how big of a bone you want, I have big dogs so I go about 2-3 inches wide....if you have a little dog make them narrower but don't go under 1 inch wide or it won't hold up!  You will need 6 strips per rope.

pile of strips....aren't they lovely
Don't get too fussy cutting them, it's okay if they aren't perfectly straight or exactly the same width.

Step 3: Take your 6 strips and lay them on top of one another, tie a knot near one end.

tight knot a few inches from the end
Step 4: Begin braiding VERY tightly holding two strips together for each part of the braid, the tighter you braid the longer it will last and the less little pieces of fleece your dog will eat (they will probably eat some but it comes off in small bits and passes right though, their doodoo will be quite colorful though).

the tighter the better when you braid!

Step 5: After 4-5 inches of braiding (2-3 if making a small bone) tie two knots using the middle strips and each side.  We're basically just securing our braiding to make sure it stays nice and tight and that the fleece doesn't stretch out as fast if used as a tug toy.


Two knots to secure the braiding nice and tight

Step 6: Braid another 2 inches or so and then tie another pair of knots as in Step 5.  This is creating a nice tight core area where we will make a center knot later.

Step 7: Braid for another 4-5 inches and tie off with a large knot just like you made at the beginning, I sometimes will tie a smaller knot with a couple of strands just to make sure my braiding doesn't loosen up while I'm tying this knot.  Pull it as tight as you can get it!

Step 8: Tie a knot in the middle where your two smaller knots are. This adds strength and durability to the finished item and protects your hands a little more when playing tug. 
Tie a knot in the center

Step 9: Trim both ends to be nice and neat. All done!

Izzy loves the new fleece rope toy!



Saturday, January 7, 2012

Vi's Shell Headband - Free Crochet Pattern

Tonight I polled my Facebook fans for an idea for a free pattern for this blog.  Apparently everyone was out partying and I got two suggestions.  This is Vi's Shell Headband named after the daughter of my cousin Karen who suggested a headband pattern.


This will fit infants through school-aged children.  I can stretch mine to fit me but it's a tight fit and my yarn is strechier than normal cotton yarn.

Materials:

A small amount of cotton yarn (I used Nashua's Cilantro cotton blend yarn, this yarn is super stretchy and has great stitch definition)

G hook

Tapestry Needle

Optional: yarn of choice for flower decoration 

Abbreviations:

fdc - foundation double crochet
st- stitch
sl st- slip stitch
dc- double crochet
ch- chain

Special Stitches:

shell stitch - 5 dc in the same stitch

foundation double crochet (fdc) - this is a chainless foundation stitch which makes for a much stretchier finished item which is ideal for headbands.  I can't explain it very well but Teri over at Diamond Crochet & Crafts did a great tutorial which you can find here http://diamondcrochetcrafts.blogspot.com/2011/12/how-to-do-foundation-double-crochet.html

Instructions:

Row 1: Do 30 fdc stitches (count the beginning ch 3 as one of the stitches).  Turn. (there is no turning chain)

Row 2: Skip 2 st, *shell stitch in next st, skip st, sl st in next, skip st*, repeat from * to * to the end of the row.



Turn your work 1/4 turn so that the end is facing up.  Sl st in in side of the beginning ch 3 of the foundation row.



Row 3: repeat row 2 stitching into bottom of the foundation row.



At the end of row 3 do not finish off, instead fold right sides together and slip stitch the two ends together. 



Finish off and weave in ends.



Use as is or add your choice of decoration.  I added a nice and easy flower from one of my favorite blogs.  You can find it here http://neannersshop.blogspot.com/2010/11/super-duper-easy-perfect-posy.html.  You can glue the flower to an aligator clip and switch out decorations to match outfits.